Famco Chimney Liner & Rebuild Nationwide

Famco Chimney Liner & Rebuild in Rockland County: What to Know First

We provide independent Famco chimney liner replacement and rebuild work throughout Rockland County, typically completing a full stainless liner install in a single day with a 90-Day Done Right Promise on every job. Most Famco liner replacements run between $900 and $2,600 depending on flue height, liner type, and whether the crown or chase top needs work at the same time. If you own a Famco stove, insert, or furnace venting system and the liner is showing its age, call (845) 599-0832 and we’ll give you a straight answer before anyone reaches for a checkbook.

Call (845) 599-0832

This page is for homeowners in Rockland County who already know the Famco name, or who discovered it stamped on a liner or stove component during a recent inspection. We’ve worked on enough Famco systems across Nyack, New City, Suffern, and Pearl River to know exactly how they age in this climate. And here’s the thing: your flue doesn’t care how the fire looks. It cares how it breathes.

How Famco Products Fail - and How We Fix Them

• Famco stainless steel liners develop pinholes at the seam welds first. We see this constantly in Rockland County homes, especially on liners installed in the 1990s and early 2000s. The weld points corrode faster than the surrounding metal because of the acidic condensate that forms when oil or gas exhaust cools inside the flue. What starts as a tiny pinhole becomes a carbon monoxide path. We don’t patch pinholes, we replace the liner. A patch holds until it doesn’t, and “doesn’t” is never a convenient time.
• Famco flexible liner mesh gets crushed during DIY chimney cap replacement. More common than people think. A homeowner climbs up to swap a cap, steps or kneels on the liner top, and suddenly the flue has a flat spot that won’t draft. We’ve pulled crushed Famco flex liners out of chimneys in Pearl River and Nanuet where the homeowner swore the liner “looked fine from the top.” It doesn’t take much pressure. The fix is a new section, properly sized and re-insulated.
• Famco connector pipe warps where it meets the stove collar on wood-burning installs. Overfiring is usually the cause, but so is running the stove hot with an undersized liner. The connector warps, the joint loosens, and smoke backs into the room on startup. We replace the connector with the right gauge and match it to the existing Famco liner diameter. If the liner is still sound, we don’t sell you a new one. If it isn’t, we tell you that too.
• Famco masonry adapter plates crack at the mortar joint after freeze-thaw cycles. Rockland County winters are hard on anything metal attached to masonry. Water gets into the joint, freezes, expands, and the adapter plate cracks or lifts. Once that happens, rain runs straight down the outside of the liner and into the smoke chamber. A full rebuild isn’t always needed. We reset the adapter with proper flashing and a high-temperature sealant, then check the crown while we’re up there.
• Famco gas vent liners corrode from the inside out when the appliance is oversized for the flue. This one surprises people. A gas furnace or water heater that’s bigger than the flue sizing allows will dump more moisture into the liner than it can handle. The result is interior corrosion you can’t see until we run a camera down the flue. The fix is a correctly sized liner, which sometimes means downsizing the diameter, not upsizing. The camera footage and a plain-English verdict, every time, no exceptions.

Our Famco Chimney Liner & Rebuild Process

Here’s what actually happens when you call us about Famco liner work in Rockland County:

1. 1
   You call (845) 599-0832. A live person answers. It may well be Wendell himself. We schedule a time, give you a real arrival window, and there’s no trip charge inside the county.
2. 2
   We inspect everything, not just the liner. Camera down the flue, a check of the crown, the smoke chamber, the connector pipe, and the appliance itself. You see the footage. We explain what we’re seeing in plain English.
3. 3
   We give you a flat price before a single tool comes off the truck. The number you hear on the phone is the number on the invoice. No “we found something else” surprises at the door. If the liner is fine, we say so and move on.
4. 4
   We decide on OEM Famco or equivalent-quality aftermarket parts together. Famco liners are well made, but so are the DuraFlex and Olympia systems we carry. If your liner is out of production or backordered, we tell you what the aftermarket option costs and whether it holds up to Rockland County winters. You decide. We install.
5. 5
   The new liner goes in, connected properly, insulated if needed, and tested. We fire the appliance, check the draft, check for leaks, and walk you through what we did. The work area is left cleaner than we found it.
6. 6
   Your 90-Day Done Right Promise is in writing. If something isn’t right, one call brings the crew back at no additional cost. Wendell puts his name on the work and runs into you again on Saturday.

What Famco Chimney Liner & Rebuild Costs in Rockland County

Here are honest numbers for the most common Famco jobs we do in Rockland County. These are flat prices, not estimates with fine print.

What moves the price: flue height, liner diameter, whether insulation is needed, roof pitch, and whether the crown or chase top is failing alongside the liner. We don’t charge extra for the camera inspection, and we’ll show you exactly what we found. Call (845) 599-0832 for a free estimate. If it doesn’t need doing, we’ll tell you that too.

Why Rockland County Homeowners Call Top Hat Chimney for Famco Work

We’ve been cleaning and repairing chimneys in Rockland County since 1999. Wendell Pike grew up in San Diego, but he’s spent the better part of two decades driving the roads of this county, from Nyack down to Pearl River, and he knows how the freeze-thaw cycles, the wet springs, and the salt air off the Hudson treat metal liners. He learned the trade at Palomar College outside San Diego, where a shop instructor told him the job was mostly about patience and a decent flashlight. That turned out to be about right.

We’re not a franchise that rotated in last spring. We’re locally owned and owner-operated, with a published address and license number. Our techs are background-checked and arrive in uniform. We carry Famco parts, but we also stock DuraFlex, HeatShield, and Gelco systems, so if a Famco liner is out of production or a better option fits your flue, we’ll tell you. Every completed job carries the 90-Day Done Right Promise in writing. Senior and veteran discounts are permanent, and we’ll give you a free second opinion on any competitor’s written estimate. Ask anyone on your street.

FAQs